9
EN
advancEd ParaMEtEr sEtting
note:
The motor parameter setting cannot be carried out when the gate is moving.
Changes to the parameters will be taken into account after the first time the gate is opened.
The remote control must be placed on the electronic unit to access the settings.
Access to the settings with a 3 button remote control is not possible.
Selection of the buttons of your
2 or 4 button remote controls
You can memorise any button on your remote
control to control the opening of the gate.
The following button, if activated, will make it
possible to control pedestrian opening of the gate
(see page 10 to activate pedestrian opening).
Button 1 cannot be programmed for
pedestrian opening.
Any free buttons or the pedestrian button when
not activated can be used to control other
automatic functions (garage door, roller blind,
etc.).
2 buttons
4 buttons
or
or
Complete
Opening
Pedestrian Opening
(if activated)
Free
1
1
2
2
3
4
1
2
CODE
3
4
1
2
CODE
3
4
1
2
CODE
3
4
1
2
CODE
Possible combinations for Fully Open / Pedestrian
opening buttons on a remote control
Memorising a 2 or 4 button remote control
[1].
Place the remote control to be memorised
on the target.
[2].
Briefly press the button on the remote
control that will control the COMPLETE
opening of your gate.
> The RADIO
indicator will come on
then go out when you release the button
on the remote control.
The button has been memorised.
RESET
30s
RESET
30s
<0,5s
Memorising a 3 button remote control
[1].
Place the remote control to be memorised
on the target.
[2].
Briefly press the up or down button on the
remote control.
> The RADIO
indicator lights up then
goes out.
The remote control has been stored.
RESET
30s
RESET
30s
<0,5s
If you have stored 16 remote controls and you store a 17th remote control, the first remote
control stored will be deleted and so on.
