10
EN
activating pedestrian opening
activating the auto closing mode
(recommended for solar power)
Pedestrian opening can be activated on the button of a memorised 2 or 4 button remote control (see
«Selecting the buttons of your remote control» page 9)
[2].
Briefly press the button to be
activated on the remote control.
> The RADIO
and PEDESTRIAN
indicators will light up then go out.
Pedestrian opening is activated on this
button.
[1].
Place the memorised remote control on
the target.
RESET
30s
RESET
30s
<0,5s
To deactivate pedestrian opening on a button
, repeat the procedure for activation pedestrian
opening (described above) for this button. The PEDESTRIAN indicator
goes out.
Note:
The automatic mode can only be activated if a set of photoelectric cells is installed
(see wiring page 13).
To deactivate automatic closing mode and return to sequential mode,
repeat step 1 above and briefly
press button 2
on the remote control, the AUTO CLOSE indicator
will go out and then flash.
Press button 1 on the remote control 3 times.
RESET
30s
RESET
30s
RESET
30s
RESET
30s
RESET
30s
RESET
30s
RESET
30s
RESET
30s
1
2
3
x3
[1].
Place a memorised 2 or 4
button remote control on the
target.
Press button 1 on the
remote control until the AUTO
CLOSING indicator
flashes.
[2].
Press button 2 on the remote
control until the AUTO CLOSE
indicator goes out then lights
up continuously.
Release the button.
> The AUTO CLOSE indicator
flashes.
[3].
Press button 1 on the
remote control 3 times.
> The AUTO CLOSE
indicator stays on to indicate
that automatic mode has been
activated.
note:
Once step 1
has been carried out,
you can carry out the
following steps remotely
(without placing the
remote control on the
target).
