Elixo 800/1300/2000
16
Copyright © 2011 Somfy SAS. All rights reserved.
EL
10. δίαΓραφη ολων των τηλεχείρίςτηρίων καί των
αςυρματων χείρίςτηρίων
11. δίαΓνωςτίκος ελεΓχος
Πατήστε το πλήκτρο PROG της RTS ασύρματης μονάδας (για
περισσότερα από 7 δευτ.) έως ότου το ενδεικτικό αρχίσει να
αναβοσβήνει.
Όλα τα τηλεχειριστήρια και τα ασύρματα χειριστήρια διαγράφονται.
Πρόβλημα
αιτία
λύση
το μοτέρ δεν
λειτουργεί
Απουσία τάσης
τροφοδοσίας
• Ελέγξτε εάν υπάρχει τάση στους ακροδέκτες εισόδου της τροφοδοσίας του μοτέρ.
• Βεβαιωθείτε ότι το καλώδιο τροφοδοσίας δεν έχει κοπεί (η αντικατάσταση του
καλωδίου τροφοδοσίας πρέπει να πραγματοποιηθεί από εξουσιοδοτημένο τεχνικό).
Βλάβη ασφάλειας
Αντικαταστήστε την ασφάλεια.
Παρέμβαση της
θερμικής προστασίας
του μοτέρ
Αφήστε το μοτέρ σβηστό για τουλάχιστον 5 λεπτά και επαναλάβετε έναν νέο
χειρισμό.
η πόρτα δεν
ολοκληρώνει τη
διαδρομή της
Παρέμβαση
του ελέγχου
πρόσκρουσης
σε εμπόδιο
• Αποσυμπλέξτε την πόρτα και βεβαιωθείτε ότι δεν υπάρχουν εμπόδια. Εάν
υπάρχουν εμπόδια, απομακρύνετέ τα.
• Επαναλάβετε τη διαδικασία «προγραμματισμός των χρόνων εργασίας και ρύθμιση
της δύναμης πρόσκρουσης» της σελίδας 12 επιλέγοντας μεγαλύτερη δύναμη.
Σημείωση: ο έλεγχος πρόσκρουσης μπορεί να απενεργοποιηθεί με τοποθέτηση
του μικροδιακόπτη 1 του SW1 στη θέση ON, σε αυτήν την περίπτωση, πρέπει
να χρησιμοποιήσετε άλλα συστήματα ασφαλείας (π.χ. πρεσοστάτη) σύμφωνα
με τα ισχύοντα πρότυπα. Αυτή η πτυχή είναι ιδιαίτερα σημαντική, διότι Η
ΕΥΘΥΝΗ ΕΓΚΑΤΑΣΤΑΣΗΣ ΤΟΥ ΑΥΤΟΜΑΤΙΣΜΟΥ ΚΑΙ ΤΗΣ ΛΕΙΤΟΥΡΓΙΑΣ
ΤΟΥ «ΣΥΜΦΩΝΑ ΜΕ ΤΑ ΠΡΟΤΥΠΑ» ΑΝΗΚΕΙ ΣΤΟ ΑΤΟΜΟ ΠΟΥ
ΠΡΑΓΜΑΤΟΠΟΙΗΣΕ ΤΗΝ ΕΓΚΑΤΑΣΤΑΣΗ.
Κακή ρύθμιση των
ορίων διαδρομής
Ελέγξτε και ρυθμίστε τη θέση των στοπ ορίων διαδρομής και την σχέση τους
με το ελατήριο ελέγχου.
Ανεπαρκής θέση του
μοτέρ
Βεβαιωθείτε ότι η απόσταση ανάμεσα στο στοπ ορίου διαδρομής και το
μπροστινό άκρο εξόδου του ελατηρίου περιλαμβάνεται μεταξύ 25 και 35 mm.
Διακοπή ρεύματος
κατά τη λειτουργία
Ο πρώτος χειρισμός ανοίγματος πραγματοποιείται κατά την επιβράδυνση (εάν
η πόρτα βρίσκεται στην ενδιάμεση θέση) για το πολύ 300 δευτ., διαφορετικά
πρέπει να φέρουμε χειροκίνητα την πόρτα σε θέση πλήρους ανοίγματος ή
πλήρους κλεισίματος (βλ. τμήμα χρήστη).
η πόρτα δεν
μετακινείται ή το
μοτέρ λειτουργεί
χωρίς αποτέλεσμα
Οι πυκνωτές έχουν
εξαντληθεί
Μετρήστε τις χωρητικότητες των πυκνωτών και αντικαταστήστε τους εάν
χρειάζεται.
η πόρτα
μπλοκάρει πάνω
στο μηχανικό στοπ
Ακατάλληλη ρύθμιση
των στοπ ορίων
διαδρομής
• Αφαιρέστε την κάτω ταινία του μοτέρ.
• Ξεβιδώστε τα παξιμάδια στερέωσης στα μπουζόνια της πλάκας έδρασης.
• Αφαιρέστε το μοτέρ από τη θέση του, αποσυνδέοντας το γρανάζι της
οδοντωτής ράγας.
• Μετατοπίστε χειροκίνητα την πόρτα μακριά από το μηχανικό στοπ.
• Αποσυμπλέξτε το μοτέρ.
• Επανατοποθετήστε το μοτέρ στην πλάκα έδρασης.
• ρυθμίστε κατάλληλα τα στοπ ορίων διαδρομής.
• Επανατοποθετήστε την κάτω ταινία και μπλοκάρετε το μοτέρ.
• Επαναλάβετε ενδεχομένως τον προγραμματισμό των χρόνων εργασίας και της
δύναμης χτυπήματος.
η ακτίνα
δράσης των
τηλεχειριστηρίων
είναι μειωμένη
Η μπαταρία του
τηλεχειριστηρίου έχει
εξαντληθεί
Εάν το ενδεικτικό του τηλεχειριστηρίου ανάβει αμυδρά ή δεν ανάβει,
αντικαταστήστε τη μπαταρία του τηλεχειριστηρίου (βλ. τμήμα χρήστη).
Κακή σύνδεση της
κεραίας
Βεβαιωθείτε ότι η κεραία είναι σωστά συνδεδεμένη στους ακροδέκτες 21-22.
Εγκατάσταση της
εξωτερικής κεραίας
Βεβαιωθείτε ότι η κεραία δεν είναι εγκατεστημένη σε μεταλλική βάση.
Βεβαιωθείτε ότι βρίσκεται σε ανοιχτό χώρο.
PROG
>7s
PROG
PROG