NL
Control Box 3S io
13
Copyright © 2015 Somfy SAS. All rights reserved
Code
Omschrijving
waarden
(vet = standaard)
uitgevoerde
afstelling
Toelichting
p05
Lange vertraging van
automatisch sluiten in
voetgangerscyclus
0 tot 99 ( waarde tijdsduur
= waarde x 5 min.)
0: 0 s
De waarde 0 moet geselecteerd zijn als de korte vertraging van de automatische sluiting
in voetgangerscyclus is ingesteld.
p07
Veiligheidsingang
cellen
0: niet actief
1
:
actief
2: actief met zelftest door uitgang
test
3: actief met zelftest door
voedingsomschakeling
4: cellen bus
0: er wordt geen rekening gehouden met de veiligheidsingang.
1: veiligheidssysteem zonder zelftest, elke 6 maanden moet de werking van het systeem
getest worden.
2: de zelftest van het systeem vindt elke werkingscyclus plaats door uitgang test ,
toepassing reflecterende cel met zelftest.
3: de zelftest van het systeem vindt elke werkingscyclus plaats
door voedingsomschakeling van de uitgang voeding cellen (klemmen 21 en 22).
4: toepassing cellen bus.
p09
Programmeerbare
veiligheidsingang
0: niet actief
1
:
actief
2: actief met zelftest door uitgang
test
3: actief met zelftest door
voedingsomschakeling
0: er wordt geen rekening gehouden met de veiligheidsingang.
1:
veiligheidssysteem zonder zelftest
.
2: de zelftest van het systeem vindt elke werkingscyclus plaats door uitgang test
3: de zelftest van het systeem vindt elke werkingscyclus plaats
door voedingsomschakeling van de uitgang voeding cellen (klemmen 21 en 22).
p10
Programmeerbaar
veiligheidsingang -
functie
0: actief sluiten
1: actief openen
2: actief s ADMAP
3: elke verboden beweging
0: de te programmeren veiligheidsingang is alleen actief bij het openen.
1: de te programmeren veiligheidsingang is alleen actief bij het openen.
2: de te programmeren veiligheidsingang is alleen actief bij het sluiten en als deze
geactiveerd is. het openen van het hek is onmogelijk.
3: toepassing noodstop; als de programmeerbare veiligheidsingang geactiveerd is, dan is
geen enkele beweging van het hek mogelijk.
p11
Programmeerbare
veiligheidsingang
-actie
0: stoppen
1: s terugtrekken
2: s totaal omkeren
0: toepassing noodstop,
verplicht als p10=3
verboden als een contactstrip verbonden is op de te programmeren veiligheidsingang
1: aanbevolen voor een toepassing contactstrip
2: aanbevolen voor een toepassing cel
p12
Voorwaarschuwing
van het oranje licht
0: zonder voorwaarschuwing
1: met voorwaarschuwing van 2 s
voor beweging
Als het hek uitkomt op de openbare weg, bent u verplicht met voorwaarschuwing te
selecteren: P12=1.
p13
Uitgang
zoneverlichting
0: niet actief
1: bestuurde werking
2: automa bestuurde
werking
0: er wordt geen rekening gehouden met de uitgang zoneverlichting.
1: de besturing van de zoneverlichting vindt plaats met een afstandsbediening.
2: de besturing van de zoneverlichting vindt plaats met een afstandsbediening als het
hek gestopt is + de zoneverlichting gaat automatisch aan als het hek in beweging is en
blijft branden aan het eind van de beweging tijdens de geprogrammeerde tijdsduur bij
parameter "
p14
".
p13=2 is verplicht voor een werking in automatische modus
.
p14
Tijdsduur
zoneverlichting
0 tot 60 (tijdsduur = waarde x 10 s)
6: 60 s
Als de waarde 0 geselecteerd is, gaat de zoneverlichting onmiddellijk uit aan het eind van
de beweging van het hek.
p15
Hulpuitgang
0: niet actief
1: automatisch: controlelampje hek
geopend
2: automatisch: tijdgeschakeld
bistabiel
3: automatisch: met impuls
4: bestuurd: bistabiel (ON-OFF)
5: bestuurd: met impuls
6: bestuurd: tijdgeschakeld
bistabiel
0: er wordt geen rekening gehouden met de hulpuitgang.
1: het controlelampje van het hek is uit als het hek gesloten is, knippert als het hek in
beweging is en brandt als het hek geopend is.
2: uitgang geactiveerd aan het begin van de beweging, tijdens de beweging, daarna
gedeactiveerd aan het eind van de geprogrammeerde tijdsduur van de parameter
"
p16
".
3: impuls op contact aan het begin van de beweging.
4: elke druk op de geprogrammeerde toets van het radiobedieningspunt zorgt voor de
volgende werking: ON, OFF, ON, OFF...
5: impuls op contact door een druk op de geprogrammeerde toets van het
radiobedieningspunt.
6: uitgang geactiveerd door een druk op de geprogrammeerde toets van het
radiobedieningspunt ,daarna gedeactiveerd aan het eind van de met parameter "
p16
"
geprogrammeerde tijdsduur .
p16
Tijdsduur hulpuitgang 0 tot 60 (tijdsduur = waarde x 10 s)
6: 60 s
De tijdsduur hulpuitgang is alleen actief als de geselecteerde waarde voor P15=2 of 6.
p17
Uitgang slot
0: actief met impuls 24v
1: actief met impuls 12V
het slot is vrijgemaakt bij het starten van het openen.
p18
Ramstoot
0: niet actief
1: actief
0: de ramstoot is niet actief.
1: aanbevolen voor het gebruik van een elektrisch slot.
Deze parameter is uitsluitend beschikbaar op de bedieningskasten Control Box 3S Axovia
io.
p19
Snelheid bij sluiten
1: laagste snelheid
bij
10: hoogste snelheid
Standaardwaarde:
- Control Box 3s Axovia io: 5
- Control Box 3s Ixengo io: 6
In geval deze parameter is gewijzigd, moet de installateur verplicht controleren of de
krachtbegrenzer voldoet aan de vereisten van bijlage A van de norm EN12 453 of een
veiligheidsstrip installeren.
p20
Snelheid bij openen
p21
Vertragingszone bij
sluiten
0: kortste vertragingszone
bij
5: langste vertragingszone
Standaardwaarde: 1
p22
Vertragingszone bij
openen
0: kortste vertragingszone
bij
5: langste vertragingszone
Standaardwaarde: 1