![background image](http://html.mh-extra.com/html/somfy/control-box-3s-io/control-box-3s-io_installation-instructions-manual_1317477058.webp)
EN
Control Box 3S io
13
Copyright © 2015 Somfy SAS. All rights reserved
Code description
values
(bold = default)
Setting
completed Comments
p05
Long automatic
closing time delay in
pedestrian cycle
0 to 99 ( time delay value
= value x 5 min)
0: 0 s
Value 0 must be selected if the short automatic closing time delay in pedestrian cycle is
active.
p07
Cell safety input
0: inactive
1
:
active
2: active with autotest via test output
3: active with autotest via power
supply switching
4: bus cells
0: the safety input is not taken into account.
1: safety device without autotest; it is essential to check that it is operating correctly every 6
months.
2: the autotest is run on the device for each operating cycle via the test output,
reflex cell application with autotest.
3: the autotest is run on the device for each operating cycle via power supply switching of
the cell power supply output (terminals 21 and 22).
4: bus cells application.
p09
Programmable safety
input
0: inactive
1
:
active
2: active with autotest via test output
3: active with autotest via power
supply switching
0: the safety input is not taken into account.
1:
safety device without auto-test
.
2: the autotest is run on the device for each operating cycle via the test output
3: the autotest is run on the device for each operating cycle via power supply switching of
the cell power supply output (terminals 21 and 22).
p10
Programmable safety
input - function
0: active closing
1: active opening
2: active c ADMAP
3: all movement disabled
0: the programmable safety input is only active when closing.
1: the programmable safety input is only active when opening.
2: the programmable safety input is only active when closing and, when activated, the gate
cannot be opened.
3: emergency stop application; if the programmable safety input is activated, the gate cannot
be moved.
p11
Programmable safety
input - action
0: stop
1: stop + partial reversal
2: stop + complete reversal
0: emergency stop application,
compulsory if p10=3
disabled if a safety edge is connected to the programmable safety input
1: recommended for safety edge application
2: recommended for cell application
p12
Orange warning light
0: no warning
1: with 2 s warning prior to movement
If the gate opens onto a public path, the "with warning" configuration must be selected:
P12=1.
p13
Area lighting output
0: inactive
1: controlled operation
2: aut controlled
operation
0: the area lighting output is not taken into account.
1: the area lighting is remotely controlled.
2: the area lighting is remotely controlled when the gate is stat the area lighting
comes on automatically when the gate is moving, and remains on when it stops moving
for the duration of the time delay programmed in parameter "
p14
".
p13=2 is compulsory for operation in automatic mode
.
p14
Area lighting time
delay
0 to 60 (time delay value = value x 10 s)
6: 60 s
If value 0 is selected, the area lighting goes out as soon as the gate stops moving.
p15
Auxiliary output
0: inactive
1: automatic: gate open indicator light
2: automatic: timed bistable
3: automatic: one-touch
4: controlled: bistable (ON-OFF)
5: controlled: one-touch
6: controlled: timed bistable
0: the auxiliary output is not taken into account.
1: the gate indicator light is off when the gate is closed, flashing when the gate is moving and
on when the gate is open.
2: output activated when movement starts, during movement then deactivated at the end of
the time delay programmed in parameter "
p16
".
3: one-touch at contact when movement starts.
4: operation changes as follows each time the memorised button on the radio control point is
pressed: ON, OFF, ON, OFF...
5: one-touch at contact by pressing the memorised button on the radio control point.
6: output activated by pressing the memorised button on the radio control point then
deactivated at the end of the time delay programmed in parameter "
p16
".
p16
Auxiliary output time
delay
0 to 60 (time delay value = value x 10 s)
6: 60 s
The auxiliary output time delay is only active if the value selected for P15 is 2 or 6.
p17
Lock output
0: active 24v one-touch
1: active 12V one-touch
The lock is released at the start of opening.
p18
Lock release
0: inactive
1: active
0: the lock release is inactive.
1: recommended for use with an electric lock.
This parameter is only available on Control Box 3S Axovia io models.
p19
Closing speed
1: slowest speed
at
10: fastest speed
default value:
- Control Box 3s Axovia io: 5
- Control Box 3s Ixengo io: 6
If this parameter is modified, the installer must check that the limitation of forces complies
with appendix A of the standard EN12 453 or install a safety edge.
p20
Opening speed
p21
Closing slowdown
zone
0: shortest slowdown zone
at
5: longest slowdown zone
default value: 1
p22
Opening slowdown
zone
0: shortest slowdown zone
at
5: longest slowdown zone
default value: 1