40
Copyright © 2016 Somfy SAS. All rights reserved.
EN
Images not contractually binding
2. 4. 3. Restoring the original configuration
1
Only switch o
ff
the power for the motorised product to be
reset.
1
This reset deletes all control points, sensors and travel end
stop settings and resets the favourite (my) position of the
motorised product.
1)
Position the motorised product at the mid-height position.
2)
Cut the power supply for 2 seconds.
3)
Switch the power supply back on for 5 to 15 seconds.
4)
Cut the power supply for 2 seconds.
5)
Restore the power supply: the motorised product moves for
a few seconds.
6)
Press the PROG button on the local Somfy
io-homecontrol® control point for
≈
7 seconds, until
the motorised product moves up and down twice:
The drive is now reset to its original configuration.
my
3)
1)
5)
6)
2)
4)
2 sec.
2 sec.
15 seconds.
5 seconds.
OFF
OFF
ON
ON
