Somat SPC-50S, Operation Manual

Page: 21 / 52

21
ELECTRICAL INSTALLATION
1. Pre-wired Som-A-Trol ® , operator devices & electric valves by Somat.
2. Install conduits from panel to prewired junction box, pull high voltage wires and low voltage
wires through separate conduit and do the final terminations.
3. Ground all electrical equipment.
4. Control circuit to be 115 VAC and/or 24VDC nominal. (See Approved Drawings)
5. All Som-A-Trol panels are to be wired in accordance to local, state and/or national electric
code specifications.
6. Integral pushbuttons are in panel door and pre-wired at factory. Optional remote push
button station if supplied; to be mounted & wired at workstation by electrician. (Bracket
Required by Customer)
PANEL & OPTIONAL REMOTE PUSH BUTTON STATION MOUNTING
1. Mount the Som-A-Trol ® (electrical control panel) in a suitable location (see installation
Drawings) so that the bottom of the panel is at least 48" above the finished floor or in
accordance with ADA and local requirements.
2. Install the Optional Remote Pushbutton Station onto the Dish Table or at another convenient
location. (See Diagram and Installation Drawings.)