Somat SPC-50S, Operation Manual

Page: 20 / 52

20
HYDRA-EXTRACTOR
®
OVERFLOW AND PULPER DRAIN:
1. Install 1-1/2" pipe from the Hydra-Extractor ® overflow to floor drain ( do not reduce ).
2. Install 2" pipe from the Pulper drain to floor drain ( do not reduce ).
RETURN PIPING FOR UNITS WITH A TRAY FEED ONLY:
1. Install one side of the provided tubing over to the return water elbow on the feed tray
and the other side onto the pump return water assembly (if not already factory
installed)
2. Install the provided hose clamps at each connection.
RETURN PIPING FOR UNITS WITH A TROUGH:
Pipe from the return pump to the supplied trough end flush nozzle and silver saver
connections as well as to the optional trough nozzles as shown in the trough detail on
the Installation Drawing using the provided throttling gate valves.