Somat SPC-50S, Operation Manual, Page: 19 / 52

19
PLUMBING INSTALLATION
1. All freshwater lines and drain lines not supplied by Somat®.
2. Pipe sizes to be in accordance with Somat recommendations.
3. Trough return water piping to be Type L Copper piping
(PVC Piping NOT Acceptable)
4. All fittings must be pressure rated drainage type.
5. Keep drains accessible to unit. Do not install drains under Somat equipment.
6. No external strain to be exerted on Somat equipment.
7. Protect all Somat equipment and piping from freezing and condensation.
8. All piping to be in accordance with state and local plumbing codes.
9. F” = furnished by Somat / “NF” = not furnished by Somat.
FRESH WATER:
*NOTE: Check local codes regarding the proper backflow prevention devices to be
installed.
1. Bring a 1/2" cold water line for the Pulper, to the pre-piped freshwater assembly.
(See enclosed diagram and Installation Drawings)
2. Bring a 1/2" hot water line to the pre-piped freshwater assembly on the
Hydra-Extractor (see enclosed diagram and Installation Drawing).