SOMA Pulsar-23, Manual

Page: 71 / 172

71 The Pulsar-23 Notebook : Reference & Guide
Looper & Clock
3
NOTES
3.11 Stopping & Restarting the Looper
The looper is controlled by the master clock and when the clock is stopped
the looper will also stop. The RST button will also restart the clock to
ensure the looper and clock are synchronised. Also the looper can be
stopped and started from the ‘REC CONT’ Module.
▌ MANUALLY STOPPING / STARTING THE LOOPER
1. Tap [BANK] + [L] to stop the looper. The looper will stay synchronised to
the clock.
2. The selected looper bank LED will flash yellow when stopped.
3. To restart the looper, Hold [BANK] + [M] + [ADD] for the BD Sound
generator module. This represents the first section of the looper.
4. To restart the looper from one of the other 8 partition sections, Hold
[BANK] + [M] + [ADD] or [DEL] for the Sound generator module that
represents the section 1-8, left to right. This is useful for mashups and
ad libs mixing loop sections on the fly.
5. Stopping the master clock or grounding the module ‘CLK’ will also stop
the looper. To ground the clock, patch by cable ‘GND’ to the specific
sound generator module ‘CLK’.
Tap [BANK] + [L]
to stop the looper. The bank
LED will flash when stopped.
Tap [BANK] + [M] + [ADD] or [DEL]
to restart from one of the
respective 8 partition sections.
Start of Loop
First Section
2 nd
Section
4 th
Section
6 th
Section
3 rd
Section
5 th
Section
7 th
Section
8th
Last Section