SOMA Pulsar-23, Manual

Page: 112 / 172

112
The Pulsar-23 Notebook : Reference & Guide
NOTES
Master Out & Effects
6
6.4 Delay
Delay is a classic time based effect that delays an input at the output and
when this is fed back into the input can create long echo style effects.
Pulsar-23 applies classic principles plus a unique set of operational modes
and configurations within channel 1 of the FX module.
Both effects will continuously operate but the two-way ‘DLY REV’ FX switch
must be set to {DLY} to ensure that the delay, channel 1 is the effect in
operation.
▌ WORKING WITH DELAY
1. Set the position of the FX switch to the left. This will select the {DLY}
function, channel 1 as the primary effect.
2. Select the operating mode using the ‘BPF DBL PCH’ 3-way switch. The
option will depend on the application but experimentation with all
options is encouraged.
3. Adjust the (FX) control on each of the sound generation modules from
which to send audio to the effect. The effect section operates as a send
- from the sound modules and return - mixed audio returns to the
master bus.
4. Adjust the effect parameters to taste. Ensure (DLY OUT) is audible.
(FX)
Send
Channel 1
{DLY}
Channel 2
{REV}
BPF DBL PCH
‘FX’
Time
Operating
Mode
Tune
Clock
Main Out
Bus
Delay Line DSP
Operating Mode
Feedback
MAD!
Delay
Out