Home
/
SOMA
/
Pulsar-23
/
Manual

SOMA Pulsar-23, Manual, Page: 143 / 172

Share

Page: 143 / 172

SOMA Pulsar-23 Manual Download Page 143

143

The Pulsar-23 Notebook : Reference & Guide

NOTES

Technique

8

8.2 Everything as a Sound Source

Patch Name: EaaSS

Almost everything can be used as a sound source. This example is slightly more
elaborate than the example earlier and demonstrates use of the VCA. This shows
how to use the LFO as a sound generator. This is a simple patch with the triangle
wave LFO running at high (or medium) speed.

1.

The LFO triangle output is patched through an attenuator to control the level
before entering a voltage controlled amplifier.

2.

The attenuator controls the input to the VCA.

3.

The VCA output is shaped by the incoming CV and the audio is sent to the ‘MIX
IN’ Pin which will mix with the audio mix bus. The ‘EXT’ Pins on the sound
modules also allow audio processing through the module function.

4.

The VCA CV input uses an envelope. In this example the triggering the HHT
envelope output is used to shape and activate the sound using it’s ‘ATT’ - Attack
and ‘REL’ - Release.

4

3

1

1

2

2

4

3

2

4

3

1

IN

CV

Envelope

OUT

«
...
141
142
143
144
145
...
»

Summary of Contents for Pulsar-23













































































































































































Reviews:

No comments