SOMA Pulsar-23, Manual

Page: 67 / 172

67 The Pulsar-23 Notebook : Reference & Guide
Looper & Clock
3
NOTES
To ensure good synchronisation is it is advised to press RST, the onboard
clock module reset button before looper recording. In addition it is good
practice to patch a clock divider to the ‘LRST’ Pin. This will reset the clock
and the looper start position. Using the 0.25 divider will reset each full 4 bar
length of the looper but other dividers can be used to shorten the length.
Patch ‘0.25’ to ‘LRST’ as good practice
for the full loop length. Try other
divisions to change loop length.
1
1
1 Bar / 1 Measure 1 Bar / 1 Measure 1 Bar / 1 Measure
4 Bars / 4 Measures
1 Bar / 1 Measure
Note Note Note Note
Qtr Qtr Qtr Qtr Qtr Qtr Qtr Qtr Qtr Qtr Qtr Qtr Qtr Qtr Qtr Qtr
Maximum Looper Length
128 Ticks / 4 Bars / 4 Measures
Patch ‘0.25’ clock divider to ‘LRST’ to retain synchronisation
Example; Patch clock divider ‘1’ to ‘LRST’ to shorten looper length
Example; Patch clock divider ‘0.5’ to ‘LRST’ to adjust looper length
Example; Patch clock divider ‘2’ to ‘LRST’ to adjust looper length