SOMA Pulsar-23, Manual

Page: 61 / 172

61 The Pulsar-23 Notebook : Reference & Guide
Looper & Clock
3
NOTES
Three track - multi clocked pattern
2
1
2
1
2
Use different clock sources to trigger or alter the modules clocks. Try using a
“roaming” patch cable or by a manual single hand patch to trigger from the ‘GND” pin
to affect clocks in an ad hoc way. This can throw them out of synchronisation and
create interesting and experimental patterns. Press the RST Reset button to reset the
Master Clock synchronisation.
SD HHT
Rather than triggering modules from the clock, each drum module has a separate
clock input. Setting different clock rates to each module can be a more elegant and
simpler solution for multiple timing. The drums would still require triggering and it can
be assumed in this example they are recorded into a loop for 3 drum modules. This is
a chaotic use of the clock with drum modules but adding other clock techniques can
develop the patch even more.
1
1
2
�
�
�
�