29
IMPORTANT!
This freestanding oven must be connected
to the mains power supply only by a suitably qualified
person. This freestanding oven must be earthed.
The appliance is fitted with an approved 15 Amp flexible
cord and plug which must be connected to a correctly
earthed socket outlet. The manufacturer is not liable
for any direct or indirect damage caused by faulty
installation or connection. It is therefore necessary that all
installation and connection operations are carried out by
qualified personnel complying with the local and general
regulations in force.
REPLACING THE POWER CORD
•
Replacements should only be made by a qualified
electrician.
•
Use a cable according to the applicable local
regulations.
•
The wire section on the cable must not be less than
1.5mm
2
(3 × 1.5mm cable).
Only use the cables available from our After Sales
Service team on 1300 11 HELP (4357).
•
If the installation requires alterations to the domestic
electrical system, call a qualified electrician. The
electrician should also check that the electrical system
is suitable for the electricity drawn by the cooker.
•
The appliance must be connected to the mains
electricity supply, checking that the voltage
corresponds to the value given in the rating plate and
that the electrical cable sections can withstand the
load specified on the plate.
•
A suitable disconnection switch must be incorporated
in the permanent wiring, mounted and positioned to
comply with the local wiring rules and regulations.
The switch must be of an approved type installed in
the fixed wiring and provide a 3mm air gap contact
separation in all poles in accordance with the local
wiring rules.
•
A switch of the approved type with a 3mm air gap
must be installed in the active (phase) conductor of
the fixed wiring.
•
The switch must always be accessible.
•
The power supply cable must not touch any hot parts
and must be positioned so that it does not exceed
75°C at any point.
•
This cooker must be connected to a suitable double
pole control unit adjacent to the cooker. No diversity
can be applied to this control unit.
•
This appliance must be connected to the electrical
supply using a cable fitted with an appropriately
rated plug. The plug must be compatible with the
socket-outlet fitted to the final sub-circuit in the fixed
wiring that is intended to supply the appliance.
CONNECTION OF THE POWER SUPPLY CABLE
IMPORTANT!
The power supply cable must be connected
by an authorized service person. DO NOT unscrew the
screws fixing the cover plate behind the terminal block.
Connect the feeding cable to a plug suitable for the load
indicated on the rating plate of the product. In case of a
direct connection to the mains (cable without plug), it is
necessary to insert a suitable omnipolar switch before the
appliance, with minimum opening between contacts of
3 mm (the grounding wire should not be interrupted by
the switch).
Before connecting to the mains, make sure that:
•
The electrical counter, the safety valve, the feeding
line and the socket are adequate to withstand the
maximum load required(see rating plate).
•
The supply system is regularly grounded, according
to the regulations in force. The socket or the
omnipolar switch can easily be reached after the
installation of the oven.
•
After carrying out the connection to the mains, check
that the supplying cable does not come into contact
with parts subject to heating.
•
Never use reductions, shunts, adaptors which can
cause overheating or burning.
ELECTRICAL CONNECTION
Important! This freestanding oven must be connected to the mains power supply only by a
suitably qualified person. This freestanding oven must be earthed.
The appliance is fitted with an approved 15 Amp flexible cord and plug which must be
connected to a correctly earthed socket outlet. The manufacturer is not liable for any
direct or indirect damage caused by faulty installation or connection. It is therefore
necessary that all installation and connection operations are carried out by qualified
personnel complying with the local and general regulations in force.
Replacing the power cord
-
Replacements should only be made by a qualified electrician.
-
Use a cable according to the applicable local regulations.
-
The wire section on the cable must not be less Than1.5mm
2
(3
×
1.5mm cable). Use only
the cables available from our After Sales Service team.
-
If the installation requires alterations to the domestic electrical system, call a qualified
electrician. The electrician should also check that the electrical system is suitable for the
electricity drawn by the cooker.
-
The appliance must be connected to the mains electricity supply, checking that the
voltage corresponds to the value given in the rating plate and that the electrical cable
sections can withstand the load specified on the plate.
-
A suitable disconnection switch must be incorporated in the permanent wiring, mounted
and positioned to comply with the local wiring rules and regulations. The switch must be
of an approved type installed in the fixed wiring and provide a 3mm air gap contact
separation in all poles in accordance with the local wiring rules.
-
A switch of the approved type with a 3mm air gap must be installed in the active (phase)
conductor of the fixed wiring.
-
The switch must always be accessible.
-
The power supply cable must not touch any hot parts and must be positioned so that it
does not exceed 75°C at any point.
-
This cooker must be connected to a suitable double pole control unit adjacent to the
cooker. No diversity can be applied to this control unit.
-
This appliance must be connected to the electrical supply using a cable fitted with an
appropriately rated plug. The plug must be compatible with the socket-outlet fitted to the
final sub-circuit in the fixed wiring that is intended to supply the appliance.
CONNECTION OF THE POWER SUPPLY CABLE
Important!
The power supply cable must be connected by an authorized service person. DO
NOT unscrew the screws fixing the cover plate behind the terminal block.
Electrical Connection
