User Manual UM0006_ASW3000-10000-T_EN_V01_0221
41
This inverter is equipped with RJ45 interfaces for multipoint
communication.
Pinout detail of the RJ45 interface on the inverter as follows:
Pin1-------
TX_RS485A
Pin2-------
TX_RS485B
Pin3-------
RX_RS485A
Pin4-------GND
Pin5-------GND
Pin6-------
RX_RS485B
Pin7-------+7V
Pin8-------+7V
The network cable meeting the EIA/TIA 568A or 568B standard
must be UV resistant if it is to be used outdoors.
Cable requirement :
- Shielding wire
- CAT-5E or higher
- UV-resistant for outdoor use
- RS485 cable maximum length 1000m
Procedure:
1. Take out the communication cover from the package.
2. Unscrew the swivel nut of the M25 cable gland, remove the
filler-plug from the cable gland and keep it well. If there is only
one network cable, please keep a filler-plug in the remaining
