User Manual UM0006_ASW3000-10000-T_EN_V01_0221
33
2. Route the stripped cable all the way into the DC connector.
Ensure that the stripped cable and the DC connector have the
same polarity.
3. Press the clamping bracket down until it audibly snaps into
place.
4. Ensure that the cable is correctly positioned:
Result
Measure
If the stranded wires are visible
in the chamber of the clamping
bracket, the cable is correctly
positioned.
•Proceed to step 5.
If the stranded wires are not
visible in the chamber, the
cable is not correctly
positioned.
•Release the clamping bracket.
To do so, insert a flat-blade
screwdriver (blade width: 3.5
mm) into the clamping
bracket and lever it open.
