User Manual UM0006_ASW3000-10000-T_EN_V01_0221
29
1.
Switch off the AC circuit breaker and secure it against
reconnection.
2. Loosen the swivel nut of AC connector. Insert the crimped
conductors into corresponding terminals and tighten screws
with the screwdriver.
Screwdriver type: PH1, torque: 0.8Nm.
3. Insert the adapter to the socket element, stuff the seal ring into
the adapter and tighten the swivel nut.
4. Plug the AC connector into the socket for the AC connection.
Damage to the inverter due to wrong wiring
If the phase line was connected to PE terminal, the inverter
will not function properly.
• Please ensure that the type of the conductors matches the
signs of the terminals on the socket element.
