Solinst 464 Mk3, User Manual

Page: 6 / 20

Model 464 Electronic Pump Control Unit User Guide
Page 2
User Flow Rates
LCD Contrast
About
ECU 464-125 Main
Preset Flow Rates
4:59 Min 99%
Timer : indicates the amount of time remaining before the Control
Unit automatically turns off. The Control Unit will automatically turn off after
5 minutes of being idle.
User Flow Rates
LCD Contrast
About
ECU 464-125 Main
Preset Flow Rates
4:59 Min 99%
Battery icon : represents the battery life remaining. Battery life is also
numerically displayed as a percentage to the left of the icon. The icon will flash
when the battery percentage is 0.
99
User Flow Rates
LCD Contrast
About
ECU 464 Main Menu
Preset Flow Rates
99
User Flow Rates
LCD Contrast
About
ECU 464 Main Menu
Preset Flow Rates
Arrows : left pointing arrow indicates there is at least one menu that can
be accessed using the left cursor key. Right pointing arrow indicates a sub-menu
exists for the active menu item, and can be accessed using the right cursor key
or OK button (moves to next item).
Figure 1-2 Electronic Control Unit LCD Display
User Flow Rates
LCD Contrast
About
ECU 464-125 Main
Preset Flow Rates
4:59 Min 99%
OK
OK button
: selects a highlighted menu item (also toggles between lower
and uppercase letters and pressure units). Press and hold for at least 3 seconds
to turn the Control Unit off. (However, this will not work in the Contrast Menu,
you can only use the left cursor key to exit the menu, and the plus/minus keys
to adjust the contrast.)
Cursor keys : navigate through the menus and menu items.
Plus/Minus keys : cycle through numbers and letters when editing or
creating new flow rates. Increase/decrease LCD display contrast. (Hold down
to scroll quickly through values).
Manual Control Valve : allows manual operation of the Control Unit. When
pushed the solenoid opens. See Page 8.
Air In: connection for the supply line from the compressed gas supply source.
(In-line filter is not required.)
Air Out : connection for the drive line from the pump.
Regulator : sets the pumping pressure. Turn clockwise to increase the pumping
pressure and counter-clockwise to decrease pressure.
Pressure Gauge: displays the pumping pressure.
Battery Enclosure : houses four (4) AA alkaline batteries.
1.4 LCD Display
1.3 Control Panel
NOTE
Pressing any key will turn the
Control Unit on (except Manual
Control button).
NOTE
The Control Unit will turn off
automatically after 5 minutes of
being idle, provided that cycling is
not active.
NOTE
Battery Life is 40,000 drive/vent
cycles or 100 hours at 10 second
drive/vent cycles.