Solinst 464 Mk3, User Manual

Page: 9 / 20

Model 464 Electronic Pump Control Unit User Guide
Page 5
When “Start” is highlighted, pressing OK will start the pumping cycle. When
the Control Unit is running the LCD will display the progress of the vent and
drive periods. Pressing the OK button when in running mode will stop the cycle.
Figure 2-7 Running Mode
Drive: 17 of 50s
Vent: 0 of 25s
Low Flow Preset
Stop
4:59 Min 99%
2.5 User Flow Rates
This menu allows you to select saved flow rates or create new flow rates.
Figure 2-8 User Flow Rates Menu
2.5.1 Saved Settings
Selecting “Saved Settings” will display a list of all previously created user-defined
flow rates (Figure 2-9 User Defined Saved Settings). Use the cursor keys to
navigate through the settings. To rearrange the order of the sites, use the '+'
key to move the highlighted setting up one position and the '-' key to move the
highlighted setting down one position.
Figure 2-9 User Defined Saved Settings
Create Settings
Preset Flow Rates
Saved Settings
4:59 Min 99%
W67 Farm 12
E89 Spill 2
A22 VOC 9
Saved Settings
W13 Landfill 34
4:59 Min 99%
NOTE
The Electronic Control Unit can
store up to 99 saved User Flow
Rates. User Flow Rates are saved to
a non-volatile memory so that they
will be retained if the batteries are
removed.