SOLiD RocketWAVE™ SRF-L-1835 Product Manual
V1.6 - DEC 2021
© 2021 SOLiD, Inc. All Rights Reserved. Confidential & Proprietary.
Page 4
General
“Only qualified personnel are allowed to handle this unit. Read carefully and understand all the warning
labels attached in this user manual”. Any personnel involved in installation, operation or service of the
SOLiD repeaters must understand and comply the following:
Understand all general and regional installation and safety regulations relating to work on high voltage
installations, as well as regulations covering correct use of tools and personal protective equipment.
The power supply unit in repeaters contains dangerous voltage level, which can cause electric shock.
Switch the mains off prior to any work in such a repeater. Any local regulations are to be followed when
servicing repeaters.
The repeater cover should be (door) securely fastened in open position, e.g. by tying it up, at outdoor work
in order to prevent door from slamming due to wind causing bodily harm or damage.
Use this unit only for the purpose specified by the manufacturer. Do not carry out any modifications or fit
any spare parts which are not sold or recommended by the manufacturer. This could cause fires, electric
shock or other injuries.
Any repeater, including this repeater, will generate radio signals and thereby give rise to electromagnetic
fields that may be hazardous to the health of any person who is extensively exposed to the signals at the
immediate proximity of the repeater and the repeater antennas.
Due to power dissipation, repeater may reach a very high temperature. Do not operate this unit on or close
to flammable materials.
Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives.
For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily ac-
cessible.
This power of this system shall be supplied through wiring installed in a normal building. If powered directly
from the mains distribution system, it shall be used additional protection, such as overvoltage protection
device.
Round terminals located on the rear of a 1.0mm2 (16AWG) or more wires using permanently connected
to earth.
CAUTIONS
This is a class B product. In domestic environment, this product may cause radio interference in which
cause the user may be required to take adequate measures.
Do NOT open except at Approved Field Force Protective Work Station
