Solid RocketWAVE SRF-L-1835 Product Manual Download Page 19

Page: 19 / 24

SOLiD RocketWAVE™ SRF-L-1835 Product Manual

V1.6 - DEC 2021

Page 19

④

Main display and control panel for a repeater information or status and configuration

Description

①

Displays the general information of the repeater, such as the manufacturer information, firmware ver-

sion, temperature, current time and etc.

②

Displays the modem information of the repeater, such as the manufacturer informatinon, model name,

version, and USIM related information like IMEI, IMSI and ICCID.

③

Provides user controllable panel for the reporting function of the repeater status. Available to setup re-

porting period and time, and reference time. Also provides reporting on and off button.

④

Displays the information of the repeater’s Plug and Play function. When the repeater is connected to

the upper layer (NMS), the IP addresses, APN, and certificate information appears.

⑤

Provides user controllable panel for the repeater installation information. Setup the date installed, the

location of the repeater and also GPS on and off are available. When the GPS is ON, the latitude and

longitude information appear.

⑥

isplays each band’s Downlink signal information such as the in/output signal strength and current

Gain values. Also the AMP of each band can be on and off using the button. If the button is

the AMP is ON. If the button is

, the AMP is off.

⑦

isplays each band’s Uplink signal information such as the in/output signal strength and current Gain

values. Also the AMP of each band can be on and off using the button. If the button is

, the

Summary of Contents for RocketWAVE SRF-L-1835























Search results

Summary of Contents for RocketWAVE SRF-L-1835

Reviews:

Related manuals for RocketWAVE SRF-L-1835

Brands by name

Popular brands

Solid RocketWAVE SRF-L-1835, Product Manual

Search results

Summary of Contents for RocketWAVE SRF-L-1835

Reviews:

Related manuals for RocketWAVE SRF-L-1835

Brands by name

Popular brands