SOLiD RocketWAVE™ SRF-L-1835 Product Manual
V1.6 - DEC 2021
© 2021 SOLiD, Inc. All Rights Reserved. Confidential & Proprietary.
Page 13
Installation
The general installation order is as follows:
①
Install the donor antenna in the direction specified by the network operator.
(Refer to 3.2 RF specification for input power range)
②
Find a proper location for the repeater.
③
Install the repeater correctly as referring to the graphic described below
④
Connect the repeater and the donor antenna using the supplied HF cable.
⑤
Connect the DC power supply to the repeater.
⑥
Check the repeater LED indicator is in green.
Install the donor antenna (SRF_HP1_ANT_B3N78)
Choose the suitable location for the antenna and make holes to secure the bracket on the wall. Assemble the
antenna to the bracket on the wall. Refer to the graphic below.
※
The ‘Hole marking sticker’ and ‘Wall plug’ in above graphic are not compulsory accessories, which may not be
included in the package.
There are two ways to install the repeater. Depending on the bracket type, the installation order may be different.
Choose the suitable one and follow the orders as described below:
A. Install the repeater - Wall mounting bracket (SRF_BRK_Wall_DB)
Find suitable location to place the bracket that is enclosed with the repeater in the package.
