manualshive.com logo in svg

Solid State Logic Matrix2 Delta, Owner'S Manual, Page: 58 / 180

Share
Download
Solid State Logic Matrix2 Delta Owner'S Manual Download Page 58

Matrix Automation

 

There are three methods of analogue automation on Matrix; the latest being 

D

elta control, the legacy implementations being the MIDI method, and the 

AFADA method. All three are detailed in the following section.

The

 

Delta Control Method

1/ E-  3

Delta Control is a unique analogue automation system that allows you to write, store, and edit your analogue fader levels and 
switches from a plugin in your DAW. Having all analogue automation stored within your DAW as plugin automation allows for 
   —! !{\     
—" {     !

To work with Delta control, simply insert a Delta plugin anywhere in your DAW, assign it to a channel on Matrix, enable 
automation on the console, and then write moves like you would with any other plugin.

Delta Plugins

j    ! %!j…|!j

_  %!j< ; [
An individual plugin for an individual channel/bus

 

³

The ability to enable/disable automation modes on individual channels of Matrix (when you write to one channel, the  

 

other channel can be in read/off mode). 

³

If only automating a small number of channels, the Single-Fader Delta plugin offers the neatest solution. Simply insert  

 

plugins as and when automation is required on a particular channel.

 

³

Easy cross-compatibility between all Delta console sessions including Duality, AWS, and Sigma.

 

³

Ability to view relevant channel waveform against automation lane data.

_  …|!j< ;  [
One plugin containing all 16 channels of automation parameters

 

³

Quicker set up of multiple channel automaton as all parameters are contained within the one plugin instance.

 

³

Compatible with Logic Pro.

 

³

Easy to view all channels of automation at once.

Chapter 3 - Analogue Signal Flow

50

Matrix

2

 Owner’s Manual

Summary of Contents for Matrix2 Delta





















































































































































































Reviews:

No comments