Solid State Logic Matrix2 Delta Owner'S Manual Download Page 54

Page: 54 / 180

Mon Soft Keys

The

Mon

menu allows you to cut or solo individual monitor outputs in your 5.1 setup. By default, pressing any of the

Left,

Centre, Right, LSurr, RSurr, Sub

buttons will cut the relevant output. Pressing the

Solo

the buttons from Cut to Solo mode. The

Mtr5.1

button switches between 5.1 and stereo monitor outputs. The

Mtr5.1

button

also changes the MIX, REC and MON meters on the meterbridge from 3 stereo meters to a single 5.1 meter.

Meters Soft Keys

The

Meters

%%&

eight lower buttons in the soft key area are in three groups: buttons 1 and 2 prevent the meters from following the console’s

Focus mode by locking them to either the analogue or DAW signals, buttons 3 and 4 provide peak hold options, and buttons 5

to 8 provide meter source options for analogue metering. All buttons cancel out other selections made within that group, and

can be returned to their default state by pressing the currently selected option:

$$,&$:#8) for details

#!4 ## !4$$,

Focus Options

By default, the meters follow the console’s Focus mode, displaying the analogue channel levels in Analogue Focus mode, and the

levels in the DAW tracks in DAW Focus mode. Pressing

Analog

causes the meters to stay with the analogue channel levels, and

pressing

DAW

causes the meters to stay with the DAW track levels, regardless of the console’s Focus mode.

Peak Hold Options:

Peak Hold is where the top segment lit by any momentary peak levels remains lit once the level drops. By default, the meters do

not have a peak hold. Pressing

Peak

introduces a 3 second peak hold, and pressing

Hold

can be reset by cancelling the

Hold

button.

Meter Source Options:

There are four source options for the channel meters:

CHIP

(channel input post-gain),

CHOP

(channel output), DAW

Return

(DAW return pre-gain), and

Post

(post fader).

Chapter 3 - Analogue Signal Flow

Matrix

Owner’s Manual

Summary of Contents for Matrix2 Delta





















































































































































































Search results

Summary of Contents for Matrix2 Delta

Reviews:

Solid State Logic Matrix2 Delta, Owner'S Manual, Page: 54 / 180

Search results

Summary of Contents for Matrix2 Delta

Reviews: