Solid State Logic Matrix2 Delta Owner'S Manual Download Page 157

Page: 157 / 180

4 - 629502XA Solo and Cuts Panel Replacement

•

There are two 629502XA assemblies in the Matrix console, one for channels 1-8 the second for channels 9-16. Remove

the knobs caps from the assembly to be removed.

•

Follow instruction #1 for the base plate removal.

•

Using a #1 Pozidrive screwdriver, remove the 12 black pan head screws from the 629502XA assembly and lift the assembly

clear of the console.

•

Unplug the eight fader and motor connections and the external ribbon cables from the 629502XA.

•

Fit new assembly and secure in place.

•

Reconnect all cables, refer to the wiring diagram in at the end of this section for further details.

Appendix G - Service

149

Matrix

Owner’s Manual

Summary of Contents for Matrix2 Delta





















































































































































































Search results

Summary of Contents for Matrix2 Delta

Reviews:

Solid State Logic Matrix2 Delta, Owner'S Manual, Page: 157 / 180

Search results

Summary of Contents for Matrix2 Delta

Reviews: