Solid State Logic Matrix2 Delta Owner'S Manual Download Page 49

Page: 49 / 180

Metering

LEFT

RIGHT

REC

MON

SOLO

MIX

SolidStateLogic

Matrix

Channel Meters

Each channel has a pair of 12-segment meters. In DAW Focus mode, the second meter allows stereo DAW

channels to be metered in the channel strip, for those HUI protocol DAWs which support this. In Analogue

Focus mode, the right-hand meter is blank and the left-hand meter displays the signal level of the channel.

The

SEL

REC

and

EDIT

symbols above each meter display DAW track status and are described in Chapter 5.

The

AUTO

lights below each meter area are used for automation and Total Recall in Analogue Focus mode, and for

DAW Automation status (HUI protocol DAWs only) in DAW Focus.

Normally the channel meters follow the desk Focus mode. However, via the

Meter

menu in the SSL soft key set, the channel

meters can be locked to the Analogue Channel or DAW metering regardless of the current Focus mode (see Page 44).

AUTO

#2 :#8F and FF

REC

and

MIX

# :#

-8

$% ) !4

Bus Meters

The

MIX

REC

MON

CUE ST

, and

FX 1-4

busses all have their own 12-segment meters located at the right-hand end of the

penthouse, displaying their post-fader signal level. The stereo busses all have separate meters for left and right.

VU Meters

There is also a pair of VU meters located in the left-hand side of the centre section penthouse. Their source

is selected in the

MAIN VU SELECT

area of the centre section, below the right-hand VU meter. The three

sources available are the

MIX

REC

and

MON

busses, and the selected source will be indicated by its

button being lit, and also by the appropriate symbol above the meters being lit. The top button in the

MAIN

VU SELECT

area, labelled

-10dB

, attenuates the signal feeding the meters by 10dB to avoid pinning the

needles to the end stop with over normalised DAW mixes.

The VU meters are unaffected by solo mode, and will keep metering the selected source even when the

SOLO

symbol above them is lit.

$:#88 #

Chapter 3 - Analogue Signal Flow

Matrix

Owner’s Manual

Summary of Contents for Matrix2 Delta





















































































































































































Search results

Summary of Contents for Matrix2 Delta

Reviews:

Solid State Logic Matrix2 Delta, Owner'S Manual, Page: 49 / 180

Search results

Summary of Contents for Matrix2 Delta

Reviews: