manualshive.com logo in svg

Solid State Logic Matrix2 Delta, Owner'S Manual, Page: 118 / 180

Share
Download
Solid State Logic Matrix2 Delta Owner'S Manual Download Page 118

Programming Soft Keys 

Soft keys are programmed from the 

DAW

 tab in the Matrix Remote:

Across the middle of the 

DAW

 tab’s window is a row of radio buttons marked 

Soft Key Set

. These buttons select which set of 

      \#  

Standard

 and 

User 1

 to 

User 

4

, are all edited in exactly the same way within the 

DAW

 tab. The 

Transport/Utility

 set functions slightly differently and will 

be dealt with on Page 113.

Below this row of buttons is a representation of the soft keys section of the Matrix control surface called 

Soft Key Setup

, 

showing the 16 buttons and the central display, with current assignments indicated in the display. Six dashes in the display indicate 

that the button is currently unassigned within this soft key set.

In the left-hand top corner of the 

Soft Key Setup

 area are the 

Save

, 

Save As

 and 

Undo

 buttons, and towards the right-hand 

top corner are the 

Show Sub Keys

 box (see Page 111) and saved data 

Status

 indicator. The 

Status

 indicator shows whether 

or not there are unsaved changes within the present soft key set. Assignments must be saved using the 

Save

 or 

Save As

 button 

in order for them to become active on the Matrix control surface. Unsaved changes can also be cancelled using the 

Undo

 button. 

Switching between soft key sets will lose any unsaved changes, and a pop-up window will appear, offering the option of 

Save

 and 

continue or 

Cancel

 the set switch.

Soft key assignments only appear in the Matrix soft keys once they have been saved.

Chapter 6 - DAW and CC Configuration

110

Matrix

2

 Owner’s Manual

Summary of Contents for Matrix2 Delta





















































































































































































Reviews:

No comments