Solid State Logic Matrix2 Delta Owner'S Manual Download Page 52

Page: 52 / 180

SSL Soft Keys

Soft keys are buttons which can have different functions assigned to them, depending on which soft key set is active.

There are a number of Matrix settings which are accessed

via the SSL set of soft keys. The soft key area of the desk is

located below the counter display in the centre section, and

comprises 16 buttons above and below the digital scribble

strip which runs across the whole desk.

The scribble strip in between the button rows indicates what

functions are currently assigned to them: the upper row of

the display refers to the row of buttons above it, and the

lower display to the row of buttons below it.

\ #!

sets and the SSL set. The soft key set which is currently assigned to

the soft key area is selected using the

SOFT KEY SETS

buttons,

located on the right-hand side of the centre section, below the

main soft key area (shown left). The SSL set is selected by pressing

the

SSL

button, below the

USER1-4

buttons. It will light to

indicate that it is selected. To exit the SSL soft keys and return to

the previously selected User set, press the

SSL

soft key button

again.

SSL

USER

set indication is retained

SOFT KEY SETS

$$,

2 ":#5GI

The SSL soft keys are arranged in menus, with the top row of soft keys acting as menu selectors and the bottom row accessing

functions within the currently selected menu.

There are eight menus of SSL soft keys, labelled:

MonOpt

Mon

Meters

Auto

IP, Misc

and

Links

within these menus are detailed over the following pages.

# ; [ \ ][49).

Chapter 3 - Analogue Signal Flow

Matrix

Owner’s Manual

USER KEY SETS

USER 1

USER 2

USER 3

USER 4

SSL MENU

Project 2 :: Title

MonOpt

Mon

Meters

Auto

Misc

Links

Summary of Contents for Matrix2 Delta





















































































































































































Search results

Summary of Contents for Matrix2 Delta

Reviews:

Solid State Logic Matrix2 Delta, Owner'S Manual, Page: 52 / 180

Search results

Summary of Contents for Matrix2 Delta

Reviews: