4
2.
Installation
1.
The cooker hood should be placed at a distance of 65-75cm (26-30inch) from the cooking surface
for the best effect. See the picture bellow:
2. Install the hook on a suitable place once the installation height is fixed,and keep it in line.The fixed
position of the inside chimney bracket is the place of chimney.
3. Fix the extensible pipe according to the lead direction and way, and then put the cooker hood on
the hook. See Pic 3.
4. Put the glass according to the lead direction and way on the cooker hood, and then use the screws
to fix the glass, also lead the extensible pipe outside of the room, meanwhile adjust the height of the
inside chimney to the position of the inside chimney bracket and fix on it by screw, here should be
sure the inside chimney can be flexed freely. See Pic 4.
5. Put the two chimneys together onto the cooker hood body, meanwhile adjust the height of the
inside chimney into the suitable height, and fix the inside chimney to the inside chimney bracket by
screw. Finally, fix the body with safety screw. See Pic 5.
6. Make sure of installation position, fix the hanging scaffold at proper place, and check firmness and
smoothness of installation. See the pic 1.
7. Adjst to proper height, joint the bracket, install on hanging scaffold. See the pic 2.
8. Fix inside chimney on hanging scaffold, enclose outside chimney on it at proper position, insert
hook into bracket to fix outside chimney temporarily. See the pic 3.
9. Fix air outlet in the vent on hood’s body, connect extensible pipe with air outlet. See the pic 4.
10. Extend the hose out off hanging scaffold, fix hood’s body on bracket. See the pic5.
11. Detach the hook, move outside chimney downward till reaching hood’s body. Pay attention not to
strike the glass. See the pic 6.
Summary of Contents for OW-INOX
Page 5: ...5 ...