Solgaz OW-INOX, Assembly And Operating Instructions Manual

Page: 8 / 10

8

When cleaning the metal mesh grease filters, also clean the holder for the metal mesh grease
filters in the appliance using a damp cloth.
Removing metal grease filter
1.
Open the lock and fold down the metal grease filter. While doing this, place the other hand under
the metal grease filter.
2.
Take the metal grease filter out of the holder.
3.
Clean the metal grease filter.
Installing the metal mesh grease filter
1. Insert the metal mesh grease filter. While doing this, place the other hand under the
metal mesh grease filter.
2.
Fold the metal mesh grease filter upwards, locking it in place.
5.
Abnormity and Solution
Fault Cause Solution
Light on, but motor does
not work
The leaf blocked Get rid of the blocking
The capacitor damaged Replace capacitor
The motor jammed bearing damaged Replace motor
The internal with of motor off or a bad
smell from the motor Replace motor
Light does not work, motor
does not work
Beside the above mentioned, check the following:
Light damaged Replace lights
Power cord looses Connect the wires as per the
electric diagram
Oil leakage
One way valve and the air ventilation
entrance are not tightly sealed Take down the one way valve
and seal with glue
Leakage from the connection of U-
shaped section and cover Take U-shaped section down
and seal with soap or paint
Shake of the body The leaf damaged and causes shaking Replace the leaf
The motor is not tightly hanged Lock the motor tightly
The body is not tightly hanged Fixed the body tightly
Insufficient suction The distance between the body and
the gas top too long Readjust the distance