12
Using the supplied Bolt/Nut/Washer, attach the bracket tab to the SkyWay enclosure ear, as shown
above. Moderately tighten all bolts to prevent inadvertent movement during the installation.
D.
U
NIT
M
OUNTING
The final installation step involves mounting your SkyWay radio to an outdoor mast or wall.
Mast Mount
: The mounting jaws can accommodate mast diameters from 0.75” – 3.0”. Note that
the smaller jaw piece can be reversed. Small diameter masts require the use of the jaw
configuration shown in the first picture, below. Large diameter masts must use the configuration
shown in the second picture.
Once the jaws are oriented appropriately, the two remaining bolts are used to tighten the mounting
kit jaws around the pole/mast.
Wall Mount:
The larger, integrated jaw has (4) corner through-holes which accommodate either
M5 or #10 screws/bolts (not included) to mount the system to a wall or soffit. In such a mounting
configuration, the smaller jaw, and (2) jaw bolts are not used.
