TT8
TREADMILL
8
TT8
ASSEMBLY INSTRUCTIONS
1
ASSEMBLY
STEP 1
1.
Remove the treadmill base frame from the carton and lay it
aside on firm, level ground.
2
ASSEMBLY
STEP 2
1.
Locate the left and right Console Mast Tubes (
5
&
4
). Slide the
Handrail Bottom Cover (
117)
onto the left and right (
118
) tubes
as shown in the illustration.
2.
Connect the Computer Cable (
32
) of the Main Frame with the
Computer Cable (
33
) at the bottom of the right Console Mast
Tube (
4
).
Before attaching the hardware to Step 3, make sure the cables you just connected don’t
get pinched in between the steel tubing. If they do, this may cause issues that prevent
the treadmill from operating properly.