TT8
TREADMILL
11
7
ASSEMBLY
STEP 7
HARDWARE
STEP 7
1.
Attach the Support tube (
3
) between the upright tubes (
4
&
5
)
with the four Flat Head Socket bolts (
99
). Tighten the bolts
completely using the Combination M5 Allen Wrench and
Phillips Head Screw Driver (
104
).
2.
Place the Beverage Holder (
48
) on top of the Support tube (
3
)
as shown in the illustration.
3.
Place the magnet of the safety key (
63
) in between the Start
and Stop buttons (if it isn
’t
already attached). The treadmill will
not function without this in place.
4.
Check to make sure all bolts and screws are completely
tightened.
8
ASSEMBLY
STEP 8
HARDWARE
STEP 8
1.
Completely tighten the bolts that secure the Console Mast
Tubes to the frame with the M6 Allen Wrench (
105
).
2.
Attach the console mast covers (
40R
&
41L
) to each mast (
5
&
4
)
with two Phillips Head Screws (
126
) on each side. Tighten using
the Combination Allen Wrench & Phillips Head Screw Driver
(
104
).
#99.
5/16” x 3/4”
Flat Head Socket Bolt
(4 pcs)
#63.
Safety Key
#126.
M5 x 10mm
Phillips Head Screw
(4 pcs)
