TT8
TREADMILL
20
CUSTOM PROGRAMS
1.
Select
CUSTOM
via the
Program
keys.
Note that the dot matrix display portion will have a single row of dots at the bottom (Unless
there is a previously stored program). If there is a program stored under the button that is
pressed, it will be retrieved.
If not, you have the option of programming in your first name.
The name
Message Window
will display and flash the letter ”A” . To change it, press the
any
▲
key, then “B” will be displayed; if the any
▼
key is pressed, the letter “Z” will be
displayed. After selecting the appropriate letter, press
STOP
. The letter “A” will again be
displayed. Repeat the procedure until all letters of your first name are programmed (7
characters maximum). When your name is displayed, press
Enter
and it will be stored under
CUSTOM.
2.
Next the menu will be display Age window first. Use the
Grade
▲
/
▼
keys to adjust. Press
Enter
. This is a must to continue even if age is not adjusted.
3.
The
Weight window
will now be display a body
Weight
value. Enter your body weight
and
press
Enter
.
4.
The
Time Window
will now be display a
Time
value. Adjust the
Time
and press
Enter
.
5.
The first column (segment) will now be blinking. Using the
Speed
▲
/
▼
or
Quick
keys,
adjust the speed level to your desired effort for the first segment then press
Enter
. The
second column will now be blinking. Repeat the above process until all segments have been
programmed. The first column will be blinking again. This is for the grade programming.
Repeat the above process to program all segments for Grade.
Note:
While in a User program, if you manually change the speed, all segment speeds from there on will also
change.
Examples:
If you increase your current speed 1 mph, the remaining segment speeds will increase by 1 mph. If you
decrease your current speed .5 mph, the remaining segment speeds will decrease by .5 mph, etc.
6.
Press the
Start
button to begin the workout and also save the program to memory.
7.
The profile picture will be re-scaled to fit in the window, but the actual speed and grade
settings will remain the same as programmed.
