Sole Fitness LCR Fitness Bike, Owner'S Manual

Page: 9 / 28

LCR FITNESS BIKE 7
HARDWARE STEP 2
#71. 3/8” x 1-3/4”
Hex Head Bolt (2 pcs)
#77. 3/8” x 19 x 1.5T
Flat Washer (4 pcs)
#89. 3/8” x 7T
Nyloc Nut (4 pcs)
#175. 3/8” x 2-3/4”
Hex Head Bolt (2 pcs)
1. Install the Rear Stabilizer (7) onto the Main Frame (1) with four Hex Head
Bolts (65) and four Flat Washers (84) using the 12/14mm Wrench (112).
2. Install the Seat Back Cover (128) onto Seat Back Bracket (5) with four Phillips
Head Screws (136) using the Phillips Head Screw Driver(114).
3. Install Seat Back Bracket (5) onto the Seat Carriage (4) with six Hex Head Bolts
(176) and six Flat Washers (77) using the 12/14mm Wrench (112).
REAR STABILIZER & SEAT BACK
1
1. Install the Seat Handle Bar (6) onto the Seat Carriage (4) with four Hex Head
Bolts (2 - 71 & 2 - 175), four Flat Washers (77) and four Nyloc Nuts (89) using
the 12/14mm Wrench (112) and 14/15mm Wrench (132).
2. Plug the two Hand pulse Cables (21 & 27) into the two rear receiver ports (26)
located on the left side rear cover, just under the seat.
3. Be sure the connectors are plugged into the correct ports. Each connector has
a tag that indicates either L for Left, which plugs into port (42) in the drawing,
and R for right, plugs into port (26).
SEAT HANDLE BAR
2
HARDWARE STEP 1
#65. 3/8” x 2-1/4”
Hex Head Bolt (4 pcs)
#77. 3/8” x 19 x 1.5T
Flat Washer (6 pcs)
#84. 3/8” x 25 x 2T
Flat Washer (4 pcs)
#176. 3/8” x 3/4”
Hex Head Bolt (6 pcs)
#136. M5 x 15mm
Phillips Head Screw
(4 pcs)