F85
TREADMILL
17
PULSE FEATURE
The
Pulse (Heart Rate) Window
will display your current heart rate in beats per minute during
the workout. You must use both stainless steel sensors on the front cross bar to displa your pulse
or wear the wireless chest strap. The pulse value will display anytime the upper display is
receiving a pulse signal.
TURNING OFF TREADMILL
1. The display will automatically turn off – go to sleep - after 30 minutes of inactivity when in
the Pause / Stop mode. Almost all power for the treadmill will be off except for some circuits
that are needed to detect if any key is pressed, indicating the console should “wake up”.
When the console is “asleep” the treadmill draws very little power, about as much as your
television when it is turned off.
2. Removing the
Safety Key
is similar to entering “sleep” mode. Turning off the main power
switch in the front of the treadmill will completely remove any power.
**ATTENTION**
Your new console comes configured in an in-store ‘Display Mode’ of operation, where the console
will remain powered on unless the main power switch is turned off. To exit the display mode, for
normal operation, press and hold the
Stop
,
Enter
and
Display
keys for 5 seconds; the display will
show: Display mode - On. Use any of the
Program
,
Incline
or
Speed
▲
keys to change the
setting to Off then press
Enter
.
