F85
TREADMILL
31
CALIBRATION PROCEDURE
1.
Remove the
Safety Key
.
2.
Press and hold down the
Start
and
Speed
▲
buttons and replace the
Safety Key
.
Continue to hold the
Start
and
Speed
▲
key until the screen displays “CALIBRATION MODE”.
3.
You will now be able to set the display to show Metric or English settings (Miles vs.
Kilometers). To do this, press ENTER key to show which you want.
4.
Grade return – On (This allows the incline to return to zero when
Stop
is pressed. For sale in
Europe, EU standards require this to be off ).
5.
Press
Start
to begin calibration. The process is automatic; the speed will start up without
warning, so do not stand on the belt.
MAINTENANCE MENU
1.
Press and hold the
Start
,
Stop
and
Enter
key at the same time and install safety key, until
the display shows “ENGINEERING MODE” (it may say maintenance menu, depending on
version).
2.
You can now scroll through the menu using the
Speed
▲ ▼
/
keys. Use the
Stop
key to
return to previous menu selection. The menu selections are:
A.
KEY TEST
- Will allow you to test all the keys to make sure they are functioning
B.
DISPLAY MODE
- Turn off to have the console power down automatically after 30 minutes of inactivity
C.
PAUSE MODE
- Turned on to allow 5 minutes of pause, turn off to have console pause in definitely
D.
LUBE MESSAGE RESET
- Reset lube message and odometer readings
E.
KEY TONE
- Will turn on/off beeping noise that is made when keys are pressed.
F.
CHILD LOCK -
Allows you to lock the keypad so no unauthorized use of the machine is allowed. When
the child lock is enabled, the console will not allow the keypad to operate unless you press and hold the
Start
and
Enter
buttons for 3 seconds to unlock the console.
