E35 / E95 Elliptical
5
UNPACKING THE UNIT
1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along the dotted Line. Lift
box over the unit and unpack.
2. Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged
parts are found, or parts are missing, contact your dealer immediately.
3. Locate the hardware package. The hardware is separated into steps. Remove the tools first.
Remove the hardware for each step as needed to avoid confusion.
E35 ASSEMBLY PACK CHECK LIST
Step 1
Assembly Instructions
(
E35 / E95 )
#105. M5 x 15m/m
Phillips Head Screw
(2pcs)
#61. 3/8" x 3-3/4"
Hex Head Bolt (4pcs)
#60. 3/8" x 2-1/4"
Hex Head Bolt (2pcs)
#76. 3/8" x19x1.5T
Flat Washer (2pcs)
#84. 3/8" x 23 x 1.5T
Curved Washer (4pcs)
Summary of Contents for E35
