background image

                                                                                                                                           

E35  /  E95  Elliptical

3

WARNING

- Read all instructions before using this appliance.

  Do not operate

elliptical

 on deeply padded, plush or shag carpet. Damage to both carpet

and

elliptical

 may result.

  Keep children away from the

elliptical

. There are obvious pinch points and other caution

areas that can cause harm.

Keep hands away from all moving parts.

Never operate the elliptical if it has a damaged cord or plug. If the elliptical is not working
properly, call your dealer.

Keep the cord away from heated surfaces.

  Do not operate where aerosol spray products are being used or where oxygen is being

administered. Sparks from the motor may ignite a highly gaseous environment.

Never drop or insert any object into any openings.

Do not use outdoors.

  To disconnect, turn all controls to the off position, then remove the plug from the outlet.

  Do not attempt to use your

elliptical

 for any purpose other than for the purpose it is intended.

  The hand pulse sensors are not medical devices. Various factors, including the user s

movement, may affect the accuracy of heart rate readings. The pulse sensors are intended

only as exercise aids in determining heart rate trends in general.

  Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on

your

elliptical

. Quality athletic shoes are recommended to avoid leg fatigue.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

Important Safety

Summary of Contents for E35













































Reviews: