2.4 CE Directives
This chapter follows the requirements of the European low voltage directives,
which contains the safety instructions and conditions of acceptability for the
endues system, which you must follow when installing, operating and
servicing the unit. If ignored, physical injury or death may follow, or damage
may occur to the unit. Read this instructions before you work on the unit. If
you are unable to understand the dangers, warnings, cautions or instructions,
please contact an authorized service dealer before installing. Operating and
servicing the unit.
The Grid connected inverter meets the requirement stipulated in Low
Voltage Directive (LVD) 2014/35/EU and Electromagnetic Compatibility (EMC)
Directive 2014/30/EU. The unit is based on:
EN 62109-1:2010 ; EN 62109-2:2011 ; IEC 62109-1(ed.1) ; IEC62109-2(ed.1)
EN 61000-6-3:2007+A:2011 ; EN 61000-6-1:2007 ; EN 61000-6-2:2005
In case of installation in PV system, startup of the unit (i.e. start of designated
operation) is prohibited until it is determined that the full system meets the
requirements stipulated in EC Directive (2014/35/EU,2014/30/EU, etc.)
The grid connected inverter leave the factory completely connecting device
and ready for connection to the mains and PV supply ,the unit shall be
installed in accordance with national wiring regulations. Compliance with
safety regulations depends upon installing and configuring system correctly,
including using the specified wires. The system must be installed only by
professional assemblers who are familiar with requirements for safety and
EMC. The assembler is responsible for ensuring that the end system complies
with all the relevant laws in the country where it is to be used.
The individual subassembly of the system shall be interconnected by means
of the wiring methods outlined in national/international such as the national
electric code (NFPA) No.70 or VDE regulation 0107.
3. Introduction
3.1 Basic features
Thanks for your purchasing with SolaX X3 Serial inverter. The X3 Series
inverter is one of the finest inverters on the market today, incorporating
state-of-the-art technology, high reliability, and convenient control
features.
Advanced DSP control technology.
Utilize the latest high-efficiency power component.
Optimal MPPT technology.
- Two independent MPP Tracking.
- Wide MPPT input range.
Advanced anti-islanding solutions.
IP65 protection level.
Max. efficiency up to 98.3%.EU efficiency up to 97.8%.
THD<3%.
Safety &Reliability: transformerless design with software and hardware
protection.
Export control.
Power factor regulation.
Friendly HMI.
- LED status indications.
- LCD display technical data, Human-machine interaction through press
key.
- PC remote control.
- Upgrade through USB interface.
- Pocket Wi-Fi/Lan monitoring.
- Control loads’ switch intelligently by RF.
- Energy conservation.
3.2 Terminals of inverter
10
11
Safety
Introduction
A
B
C
D
E
F
G
H
I
J
R
S
4
8
5 / M
e
te
r
D
R
M
A1+
B1+
PV 1
PV 2
WiFi/Lan/GPRS
RF
Upgrade
AC
OFF
ON
B2+
A1-
B1-
B2-
