1.1 Scope of Validity
This manual is an integral part of X3 Series, It describes the assembly,
installation, commissioning, maintenance and failure of the product. Please
read it carefully before operating.
Note:
“8.0”
means 8.0kW.
”T”
means “dual” MPPT strings.
MPPT.
“D”
means with “DC Switch”,
”N”
means without “DC Switch”.
“P”
means MIC PRO series.
Keep this manual at where is accessible all the time.
1.2 Target Group
This manual is for qualified electricians. The tasks described in this manual
only can be performed by qualified electricians.
1.3 Symbols Used
The following types of safety instructions and general information appear in
this document as described below:
Danger
！
“Danger” indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Warning
！
“Warning” indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
Caution
！
“Caution” indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
Note
！
“Note” provides tips that are valuable for the optimal
operation of your product
.
1 Notes on this Manual
7 Troubleshooting
7.1 Trouble Shooting
7.2 Routine Maintenance
8
Decommissioning
8.1 Dismantling the Inverter
8.2 Packaging
8.3 Storage and Transportation
Notes on this Manual
Contents
03
02
40
40
43
44
44
44
44
X3-8.0P-T-D X3-8.0P-T-N
X3-10.0P-T-D X3-10.0P-T-N
X3-12.0P-T-D X3-12.0P-T-N
X3-15.0P-T-D X3-15.0P-T-N
