Space Requirement
Ø
Installation
Installation
Mounting Steps
Ø
Step 1: Screw the wall bracket on the wall
Tools required for installation.
1.1 Place the bracket on the wall and mark down the position of the 5 holes.
1.2 Drill holes with driller, make sure the holes are deep enough (at least 60mm) to
support the inverter.
1.3 Hammer the expansion tubes in the holes, and tighten them. Then install the wall
bracket with the expansion screws.(The screwdriver. Torque: 4.5±0.2Nm)
Installation tools : crimping pliers for binding post and RJ 45, screwdriver,
manual wrench and
φ
8
Step 2: Place the inverter on the wall mounted bracket by holding the handle
holes on both sides.
20
21
Step 3: If necessary, customer can install an anti-theft lock on the top-right of the
inverter.
300mm
300mm
300mm
300mm
500mm
a)
b)
c)
d)
φ
8
driller .
Power:4
.
5
±
0
.
2Nm)
