STEP 2: Fix the back bracket and the cable hook (only for type P) to the wall.
- Mark the position of the holes.
- Insert the expansion bolts.
- Drill holes with φ 6 drill.
- Depth: at least 45 mm.
- Align the bracket and the cable hook
(only
for type P)
with the holes, and screw the self
tapping screws with the cross screwdriver.
Installation
Installation
STEP 3: Hang the EV-Charger on the wall for trial, then estimate the required length of
input cable and communication cable. After that, take the EV-Charger down.
STEP 4: Unscrew the EV-Charger’s rear cover with the cross screwdriver and take it down.
Then undo the fastening heads and take the waterproof materials away as shown below.
16
17
(torque:1.5~2 N·m)
