Solaris Mozart user manual version 2.0 122216
- 6 -
S
ETTING UP A
DMX
S
ERIAL
L
INK
1. Connect the (male) 5-pin connector side of the DMX cable to the output (female) 5-pin connector of the
DMX console.
2. Connect the opposite end of the cable (female) to the input connector of the Mozart PSU consisting of a
(male) 5-pin connector.
3. Proceed to connect from the PSU output as stated above to the input of the following PSU and so on.
4. Continue linking until the last fixture is conected in your DMX chain.
F
IXTURE
L
INKING
