Solaris Mozart user manual version 2.0 122216
- 8 -
I
NTERNAL ADDRESS SET
The Mozart 10-way power supply must be addressed via RDM.
To
set the address
for Mozart fixtures, first set the starting address for the Mozart 10-way powersupply .
To set the fixture address of Mozart fixtures (1-10), follow these steps:
Press and hold
<Address set>
button located at the back of the Mozart.
The current internal addressing number will appear (1-10).
To
change
this number, press
<Address set>
button. The next addressing number will appear. Repeat until
the desired fixture number is shown on the tile
Rendering of numbers from 1-10 shown on Mozarts LEDs:
