LEDs
- The LED indicators provide information about the device operation status:
Figure 4: Three LED Indicators
Color
Indication
Description
Red
Fault
Off
- No error
On
– Error, or during Boot/Reset
Blinking
- During pairing with the inverter
Green
Power delivery to
immersion heater
(load)
Flickering
(1)
– No power is delivered to the
immersion heater
On
- Delivering power to the immersion
heater, or during Boot/Reset
Blinking
- During pairing with the inverter
Blue
ZigBee/Wi-Fi
Communication
link to the inverter
Off
– Not paired with the inverter
Blinking
- The device is paired with the
inverter however not connected to the
monitoring platform, or during pairing with
the inverter
ON
- The device is paired with the inverter
and connected to the monitoring platform,
or during Boot/Reset
All LEDs
Off
- The device is not powered.
On
- During boot / reset
Blinking
(sequentially) - Device firmware
upgrade
Blinking
(simultaneously) - During pairing
with the inverter
(1)
Flickering: 100mS ON, 5Sec OFF
Smart Energy Hot Water Installation
11
Smart Energy Hot Water Installation Guide MAN-01-00570-1.4
Summary of Contents for Smart Energy Hot Water
Page 1: ...Installation Guide Smart Energy Hot Water Version 1 4...
Page 37: ......
