Figure 12: Inverter fan - airflow
CAUTION!
Do not block the airflow from the inverter.
To mount the inverter:
1. Position the mounting bracket against the wall/pole and mark the drilling hole
locations (refer to
Mechanical Specifications on page 1 for inverter and mounting
bracket dimensions).
2. Drill at least two holes and mount the bracket to the mounting surface. Verify that
the bracket is firmly attached to the mounting surface.
3. Hang the inverter on the bracket (See Figure 13):
a. Lift the inverter from the sides, or hold it at the top and bottom. Do not lift
holding the DC Safety Unit as it may be damaged.
b. Lower the inverter onto the U-shaped indentations of the mounting bracket. Let
the inverter lay flat against the wall or pole
Three Phase Inverter with SetApp Configuration
27
Mounting the Inverter
Summary of Contents for SE15K-AU
Page 64: ......
