UPS for 480 Vac Grid, User Guide, doc. rel. 4.0
124
8.
If you select the Send button, a test email is sent to the new recipient, to verify that that the
email has been created successfully.
Figure 107: Alarms button on email recipient screen
9.
After the recipient has been created, the Alarms button in the lower left of the screen
becomes active.
If Alarms button is selected, the following screen appears:
Figure 108: Alarm selection screen for email recipient
In this screen you indicate the alarms that you want to be included in the emails to the current
recipient.
Buttons appearing at the bottom of the screen (Figure 108) control which alarms are listed on
the screen: “All”, or only those alarms with an “Information”, “Warning”, or “Critical” severity.
From the alarms displayed, indicate the ones you want to go to the recipient by selecting the
appropriate alarm checkbox.
10.
Select Confirm.
The appropriate alarm is sent to the recipient when the UPS alarm is triggered.
