Chapter 6: User Interface
SolarEdge Installation Guide – MAN-01-00002-1.7
33
LCD User Buttons
Four buttons are located at the top of the LCD panel inside the inverter and are used for controlling the
LCD menus, as shown below:
Figure 25: LCD Internal User Buttons
Esc:
Moves the cursor to the beginning of the currently displayed parameter; goes to the previous
menu, and cancels a value change with a long press (until
Aborted
is displayed).
Up
(1), Down
(2):
Moves the cursor from one menu option to another, moves among the characters
of a displayed parameter, and toggles between possible characters when setting a value.
Enter (3):
Selects a menu option and accepts a value change with a long press (until
Applied
is
displayed).
Use the three rightmost buttons for entering 123 when entering the password.
The LCD panel and buttons may be used during the following:
Setup Mode:
After inverter installation, the field technician may perform basic inverter
configuration, as described in
Configuring the Inverter Using the LCD User
Operational Mode:
The LCD panel allows the user to check that the inverter is working properly.
Refer to
Operational Mode
on page 41 for a description of this option. Use the LCD light button to
toggle through the informative displays.
Error messages:
In the event of a problem, an error message may be displayed on the LCD panel.
Refer to
Appendix A: Errors and Troubleshooting
Configuring the Inverter Using the
on page 34 for more information.
Esc
Up (1)
Down (2)
Enter (3)
